Whammy bar/ electronics question

[BiteSizeCenter]

A few months ago I was working on my guitar to fix the strum bar. I got it fixed but in the process I broke my whammy bar. Basically what I did was I severed the gray wire from the little green microchip thing in the middle of the guitar. So my question, is it possible to take another whammy bar and connect the wire from it to the chip, and if so what would I need and how would I go about doing so?

[BiteSizeCenter]

A few months ago I was working on my guitar to fix the strum bar. I got it fixed but in the process I broke my whammy bar. Basically what I did was I severed the gray wire from the little green microchip thing in the middle of the guitar. So my question, is it possible to take another whammy bar and connect the wire from it to the chip, and if so what would I need and how would I go about doing so?

[ChrisVance]

just find out what gauge that wire was, whether it was copper, silver, etc.. Go buy a small length of that type of wire and re solder it =D

[ChrisVance]

just find out what gauge that wire was, whether it was copper, silver, etc.. Go buy a small length of that type of wire and re solder it =D